Publications in the School of Engineering in the 2017

 
Category    Bibliographic Citation*

Refereed Journals   

1.    Fred Mwila and Erastus M. Mwanaumo (2016) A situational study of rail transport usage in Zambia Journal of Business Administration and Management Sciences Research Vol. 5(6), pp. 077-088, December, 2016 , Available online athttp://www.apexjournal.org, ISSN 2315-8727© 2016 Apex Journal International
2.    Chizyuka G. Chizyuka, Shamitiba B. Kanyanga and Grain M. Munakaampe (2016) Effects of Hydrothermal Ageing on the Microbond Interfacial Shear Strength of NaOH treated Sisal Fibre Reinforced Polyester Composites. Journal of Natural and Applied Sciences (JONAS), Vol. 2 No. 1, pp 39-54. (ISSN: 2226-6429)
3.    Sikozi K.E., Siaminwe L. and Mwenda H.M. (2016) Multi-Facility Economic Zones in Zambia: An Assessment of the Local Manufacturing Industry Readiness. Journal of Natural and Applied Sciences (JONAS), Vol. 2 No. 1, pp 27-38. (ISSN: 2226-6429)
4.    Mwiya B., Muya M. and Kaliba C. (2016) Establishment of Construction Unit Cost Factor Input Values for Kohonen Architecture, Annals 10th ICEC World Congress, Rio de Janeiro – Brazil ISSN: 24481475
5.    Daka Philemon and Danni Eliya Banda (2016) The Impact of Adoption and Usage of Information and Communication Technologies (ICTs) in Selected Manufacturing and Business Firms in Zambia, Science and Technology, Vol. 6 No. 3, 2016, pp. 59-67. DOI: 10.5923/j.scit.20160603.01
6.    Joseph Kalunga and Simon Tembo (2016) Development of Fingerprint Biometrics Verification and Vetting Management System, American Journal of Bioinformatics Research, Vol. 6, No. 3, pp. 99 – 112, 2016. p-ISSN: 2167-6992 / e-ISSN: 2167-6976; DOI: 10.5923/j.bioinformatics.20160603.01
7.    Patience Kunda Banda and Simon Tembo (2016) A Study on Mobile Penetration Rate in a Multi-Simming Environment: The Case of Zambia, Microeconomics and Macroeconomics, Vol. 4, No. 2, pp. 37 – 45, July 2016. p-ISSN: 2168-457X / e-ISSN: 2168-4588; DOI: 10.5923/j.m2economics.20160402.01
8.    Njase Joel and Simon Tembo (2016) E-Policing as a Service: The Way Forward in Zambia, Science and Technology, Vol. 6. No. 2, pp. 45-58, July 2016. p-ISSN: 2163-2669/ e-ISSN: 2163-2677; DOI: 10.5923/j.scit.20160602.03
9.    Machaya L. and Tembo S. (2016) A Study on Memory Management in Wireless Sensor Nodes during Key Agreement Generation. International Journal of Networks and Communications 2016, 6(2): 19-23 DOI: 10.5923/j.ijnc.20160602.01
10.    Mpanga S., Kaoma M. and Zulu A. (2016) Paving the way for Energy Efficiency through Solar Power Projects in Zambia. International Journal of Civil, Mechanical and Energy Science, Vol.2, No.3, May 2016, pp 1-5. ISSN: 2455-5304
11.    Aduke N. R. and Simate I.N. (2016) Greenhouse Solar Drying and Thin Layer Drying of Fresh Kapenta (Stolothrissa tanganicae). International Journal of Scientific & Engineering Research (IJSER). Volume 7, Issue 5, May-2016, pp. 749 – 756. ISSN 2229-5518. http://www.ijser.org
12.    Cherotich, S. and Simate, I.N. (2016) Experimental Investigation and Mathematical Modelling of a Natural Convection Solar Tunnel Dryer. International Journal of Scientific & Engineering Research, (IJSER) Volume 7, Issue 5, May-2016, pp. 597 – 603. ISSN 2229-5518. http://www.ijser.org
13.    Kaoma C. and Muya M. (2016) Artisan Gaps in the Construction Industry in Zambia, American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS), Vol.18, No.1, pp 235-251. P-ISSN: 2313-4410 / e-ISSN: 2313-4402
14.    Lesa E. and Tembo S. (2016) Study on Factors affecting Mobile Payment System in Zambia. International Journal of Management, April Issue, Vol.6, No.2, pp. 34-45. p-ISSN: 2162-9374 / e-ISSN: 2162-8416
15.    Kalupa C.S., Mwenda H.M. Siaminwe L. and Malama T. (2016) “Performance Assessment of Commercially available CAD/CAM Software in the Manufacture of Sculptured Surfaces on a 3-Axis Vertical Machining Centre (VMC)”. International Journal of Engineering Research and Technology (IJERT), February Issue, Vol. 5 No. 2, pp 574 – 579. (ISSN 2278-0181)
16.    Siaminwe L., Chizyuka C.G., H.M. Mwenda, Mwanza M.S. and Malama T. (2016) “Strategic Justification of Advanced Manufacturing Technologies through Manufacturing Technology Research”. International Journal of Engineering Research and Technology (IJERT), January Issue, Vol. 5 No. 1, pp 837 – 842. (ISSN 2278-0181)

Refereed Proceedings of Conference   

1.    Lubobya S.C., M. E. Dlodlo, G. de Jager , A. Zulu (2016) Mobile Surveillance Application for Hybrid WiMAX-Wi-Fi Systems, in IEEE Global Wireless Summit, November 27-30, 2016, Aarhus, Denmark.
2.    Chisale P, John S. and Zulu A. (2016), Sustainable Renewable Energy Mini-Grids for Energy Access: Economic and Social Benefits of Mini-Grid Systems, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
3.    Zulu, A. John S. and Chisale P, (2016), Dual Studies - An Alternative Pedagogy for Renewable Energy Training in Southern Africa,  In Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
4.    Zulu A., Kaoma M., Muya M., Mpanga S. and Ngendo D.(2016), Research Requirements in Renewable Energy Technologies for Southern Africa, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
5.    Chipulu C., Mwanaumo E. M. and Mwiya B.(2016),  Comparison of the Clients, Consultant and Contractors Perspectives of Pre-Tender Unit Cost Factors in Zambia, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
6.    Mudzvokorwa T., Mwiya B. and Mwanaumo, E. M. (2016), Development of a Conceptual Main Contractor-Subcontractor Partnering Model, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
7.    Mwanaumo E. M., Mubuyaeta G., Chipulu C. and Chisumbe S. (2016), Identifying Health Risks related to Construction of Water Supply Infrastructure: Case of Lusaka Water, Supply, Sanitation and Drainage Project, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
8.    Mwanaumo E. M. and Chisumbe S. (2016), .Assessment of Employees Excessive Exposure to Solar Radiation on Zambian Construction Worksites, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
9.    Mwanaumo E. M., Chisumbe S. and Chipulu C.(2016),  Utilisation of Materials Safety Data Sheet on Zambian Construction Worksites, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
10.    Mwiya B., Muya M. and Kaliba C.(2016),  Adoption of Best Value Selection Method in the Zambian Road Sector, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
11.    Namukolo S., Zulu A., Nswana C. and Sitwala N. (2016), Turning to Smart Grid in Zambia, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
12.    Tembo S., Ngendo M., Mwenda H. and Malichi A.(2016),  Strategic Direction to Sustainable Electricity Generation in Zambia - A Critical Comparison of Electricity Generation Options, In  Mwanaumo E, Musonda I and Muleya F, (Eds) Proceedings of the 3rd International Conference on Development and Investment in Infrastructure Strategies for Africa,  31 August - 2 September, 2016 Livingstone, Zambia, ISBN 978-0-620-70336-9
13.    Sikozi K.E., Siaminwe L. and Mwenda H.M. (2016) Multi-Facility Economic Zones in Zambia: Is the Local Manufacturing Industry Ready? Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.
14.    Tente P., Muya M., Kaliba C. and Mwanaumo E. (2016) Construction Accidents in Zambia: Causes and Remedial Measures. Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium themed on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.
15.    Chileshe J.M., Kamanga C. and Hong T. (2016) Performance and Interaction of Critical Elements of the Chain Ropeway System. Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.
16.    Kandeke C. and Mulenga M.N. (2016) Effects of Vehicle Overload on Maintenance Management of Trunk Roads in Zambia. Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.
17.    Mulenga M.N. (2016) Correlation of SPT with DPSH Test results – A Case for some Zambian Soils. Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.
18.    Mwiya B., Muya M. and Kaliba C. (2016) Opportunities for Harmonisation of Ancillary Roadworks under Series 5000 of the SATCC Standards and Specifications. Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.
19.    Chileshe J.M., Tembo S. and Lusambo E. (2016) Master of Engineering Degree in Renewable Energy Engineering at the University of Zambia. Paper presented at the Engineering Institution of Zambia (EIZ) National Symposium on Achieving Sustainable Industrialisation, Avani Victoria Falls Resort, Livingstone, Zambia, 22nd April, 2016.